Autogenous mill
The biggest advantage of the autogenous mill is that it can directly feed the raw ore from the mining site or the coarsely crushed ore into the mill. Usually, the minerals are fed into the mill rod mill according to a certain particle size ratio. The autogenous mill can grind the material to 0.074mm at one time, and its content accounts for more than 20% to 50% of the total product. The crushing ratio can reach 4000 to 5000, which is more than ten times higher than that of ball and rod mills. The autogenous mill is a new type of grinding equipment that has both crushing and grinding functions. It uses the material itself as the medium and achieves crushing through mutual impact and grinding.
Our product advantages:
Autogenous mill | Semi-autogenous mill is the core equipment in the beneficiation process of iron ore, non-ferrous metal ore, etc. Compared with traditional crushing and grinding equipment, Luoyang Zhongtai Industrial Autogenous Mill | Semi-autogenous Mill has the advantages of simple process flow (eliminating two stages of crushers and screening equipment), low investment, short construction period, simple operation, etc. It has been recognized and used by more and more related companies at home and abroad, and has a very broad development prospect.
Technical features:
1 The transmission forms adopted by the drum mill include edge flyers, center transmission, multi-point meshing edge transmission and other transmission types; the driving forms include asynchronous motor + reducer + small gear + large gear and synchronous motor + air clutch + small gear + large gear;
2 Generally, the support method of static and dynamic pressure bearings at both ends is adopted, and a completely closed self-aligning 1200 line contact "rocker type" bearing is adopted. Single sliding shoe, double sliding shoe static and dynamic pressure support or full static pressure support can also be adopted;
3 The large open gear adopts the American AGMA standard design, equipped with a reliable sealed gear cover, and a glycerin automatic spray lubrication device;
4 The drum is the key part of the mill, and a finite element analysis is performed on it by computer to ensure its reliability;
Product display
Product Parameter
| Cylinder diameter(mm) | Cylinder length (mm) | Effective volume (m³) | Mill rev (r/min) | End cover structure form | Kind of drive | Motor | Boundary dimension (L*W*H) (m) | Weight |
| | | | | | | Power(kw) | Rotate speed(r/min) | | |
| 2400 | 1000 | 4.5 | 22 | | edge | 55 | 740 | 7.8×3.5×3.3 | 18.5 |
| 3200 | 1200 | 9.2 | 18.2 | weld | | 160 | 740 | 8×4.1×3.7 | 32.8 |
| 4000 | 1400 | 16.6 | 17.6 | weld | | 250 | 735 | 11.5×5×4.7 | 63 |
| 5500 | 1800 | 34.6 | 15 | cast | | 800 | 167 | 14.1×7×6.3 | 178 |
| 6400 | 3300 | 107 | 12.8 | cast | | 2000 | 200 | 23×10.3×9 | 306 |
| 7500 | 2500 | 107 | 11.4 | cast | | 2000 | 200 | 23×10.5×10 | 355 |
| 8500 | 4000 | 225 | 102 | cast | | 4850 | 200 | 27×14.2×12.9 | |
Product Tags:
|
|
Produce Fine Autogenous Grinding Machines For Mines Images
|
